Influence Examine of Visnaga Oil Biodiesel on the Performance and Emission Characteristics of CI Engines
نویسندگان
1 Department of Mechanical Power Engineering, Baghdad-Technical Engineering College, Middle Technical University, Baghdad, Iraq
2 Mustansiriyah University, College of Engineering, Mechanical Engineering Department, Baghdad, Iraq
3 College of Mechanical Engineering, University of Technology-Iraq, Baghdad, Iraq
4 Kerbala University, College of Engineering, Mechanical Engineering Department, Baghdad, Iraq
doi
10.22075/jhmtr.2025.37420.1721چکیده
The main reason for global warming and respiratory problems in humans is the influence of emissions from fossil fuel combustion. Levels of these pollutants have increased significantly due to the expansion of vehicle numbers, especially in Iraq, exacerbating the environmental and health impacts. Procedures to mitigate these emissions include modifying engine-part design or utilizing environmentally friendly fuel sources. The aim of this research is to perform an experimental investigation examining the use of a new type of visnaga oil biodiesel on the performance and emissions of a single-cylinder, air cooled, and 4 strokes CI engines. The visnaga oil biodiesel was added to diesel fuel in volumetric ratios of 10%, 20%, 30%, and 40%. The results of the tests show that this type of biodiesel lowers the engine's thermal efficiency while raising the EGT and BSFC. The highest decrease in BTE was 7.63% and the highest increase in BSFC was 15.28%, for biodiesel at 40% in the blend (BF40). Additionally, for the visnaga oil biodiesel, the emissions of carbon monoxide (CO) and unburned hydrocarbons (HC) were decreased, but the emissions of nitrogen oxides (NOx) and carbon dioxide (CO2) were increased. The greatest reduction in CO and HC emissions was achieved with the use of the BF40 blend, where reductions of 24.7% and 39.5% were recorded respectively, while the NOX and CO2 emissions increased by 36% and 38.2%, respectively.
