Efficiency of Zero-Valent Iron Nanoparticles and Performic Acid inEscherichia coliInactivation in Hospital Wastewater

نویسندگان

1

2 دانشگاه پیام نور

3 دانشگاه آزاد اسلامی

4 دانشگاه آزاد اسلامی

5 دانشگاه آزاد اسلامی

doi
10.48307/iahsj.2026.518011.1517
چکیده

Objectives : Hospital wastewater may contain pathogenic and antibiotic-resistant microorganisms that pose risks to public health. This study aimed to evaluate the efficiency of a combined performic acid (PFA) and nanoscale zero-valent iron (nZVI) process for the inactivation of Escherichia col i in hospital wastewater. Methods : Wastewater samples were collected from the activated sludge sedimentation unit of Velayat Hospital, Damghan, Iran. After sterilization, the samples were inoculated with E. co li ATCC 8739 and subjected to the combined PFA/nZVI disinfection process. The effects of PFA concentration, nZVI concentration, and contact time on bacterial removal were investigated using Response Surface Methodology (RSM). Data were analyzed using R software and the rsm package. Results : Increasing PFA concentration, nZVI concentration, and contact time enhanced E. coli inactivation. The optimum conditions were PFA = 25 mg/L, nZVI = 50 mg/L, and a contact time of 30 min, resulting in a 5.38-log reduction of E. coli . Performic acid exhibited an approximate half-life of 58 h in an aqueous environment. The reduced quadratic model provided the best fit to the experimental data, and contact time was identified as the most influential factor affecting disinfection efficiency. Conclusion : The combined PFA/nZVI process demonstrated effective disinfection of hospital wastewater, achieving more than 99.99% bacterial removal even at concentrations below 25 mg/L. A synergistic effect was observed between PFA and nZVI. However, due to the degradation of PFA in aqueous environments, fresh preparation of PFA is recommended for practical water and wastewater treatment applications.