Power Amplifier Linearization Using Six-port Receiver for DVB-S2 Satellite Communications
نویسندگان
1 M.Sc. Student, Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran
2 Assistant Professor, Department of Electrical Engineering, Amirkabir University of technology, Tehran, Iran
3 Professor, Department of Electrical Engineering, Amirkabir University of technology, Tehran, Iran
4 Professor, Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran
doi
10.22060/eej.2015.484چکیده
A digital look-up table adaptive predistortion technique using a six-port receiver for power amplifier linearization is presented. The system is designed in Ka-band for a DVB-S2 satellite link. We use a six-port receiver at the linearizationloop in place of classic heterodyne receivers. The six-port receiver is implemented by the use of passive microwavecircuits and detector diodes. This approach highly reduces cost and complexity of the linearization system. Thefabrication results of a five-port receiver operating in 23–29 GHz is presented in this paper. The simulation resultsconfirm suitability of using this architecture in the power amplifier linearization loop. The third order intermodulationproducts and the fifth order intermodulation products reduce about 43 dB and 25 dB respectively, after linearization ofthe power amplifier. The resulting spectrum of the output signal shows significant reduction of the intra-systeminterference to the adjacent networks which is mainly due to the nonlinearity effects of the power amplifier.
