The optimization of Cu and Fe bioleaching from converter slag using Acidithiobacilus ferrooxidans
نویسندگان
doi
10.22102/jaehr.2017.81512.1013چکیده
The main objective of this work was to assess the optimization of Fe and Cu bioleaching from converter slag using Acidithiobacillus ferrooxidans . Important parameters that contribute to the bioleaching process include initial pH, initial Fe 2+ concentration and pulp density. In order to optimize these parameters, the response surface methodology (RSM) was applied. The maximum simultaneous Fe and Cu recovery yields were 95% and 100%, respectively. The optimum conditions were initial pH 1.8, initial density 1.4 g/100 mL and initial Fe 2+ 7.3 g/L. The comparison between chemical leaching and bioleaching results showed that bioleaching improved the recovery yields of Fe and Cu by 26% and 33%, respectively. The modified shrinking core model was used to determine the rate-limiting step of the process. It was found that diffusion through the product layer and chemical reaction are the rate controlling steps.