Electrochemical Lead Sensor Based on MWCNT@SiO₂–APTES (Pb²⁺) Modified Screen-Printed Carbon Electrode

نویسندگان
doi
10.48309/jaoc.2026.559561.1358
چکیده

An electrochemical sensor has been developed for detecting Pb 2+ in water. The sensor is made from screen printed carbon electrode (SPCE) modified by MWCNT@SiO 2 -APTES (Pb 2+ ). The synthesis of MWCNT@SiO 2 involves adding MWCNT to TEOS, and APTES (Pb 2+ ) is a complex compound of APTES (3-Aminopropyltriethoxysilane) with Pb 2+ in ethanol. MWCNT@SiO 2 and APTES (Pb 2+ ) were combined at 50 o C for 24 h. To remove excess APTES, it was washed with ethanol, and Pb 2+ was removed by acetic acid, thereby forming a Pb 2+ template. Characterization of MWCNT@SiO 2 -APTES (Pb 2+ ) based on the FTIR spectrum, XRD, and surface morphology by scanning electron microscopy (SEM). Electrochemical characterization of electrodes by a standard solution of Fe(CN) 6 3- 5 mM in 0.1 M KCl and 10 ppm Pb 2+ in 0.1 M acetic buffer, pH 6 solution. Determination of Pb 2+ levels in water was achieved by square wave voltammetry (SWV). The results showed that MWCNT@SiO 2 -APTES (Pb 2+ ) had been formed and electrochemically fulfilled the requirements as a sensor material. The diffusion coefficient of Fe(CN) 6 3- in MWCNT@SiO 2 -APTES (Pb 2+ ) is lower than in unmodified SPCE, and the opposite is true for Pb 2+ solution. Analytically, this method has a limit of detection (LoD) (S/N=3) of 0.08 ppm linear concentration range of 0.1-10 ppm, and a sensitivity of 13.5 µA/ppm, enabling it to be applied to water samples containing Pb 2+ concentrations < 0.1 ppm .